Tools & Supplies

Features: 4 Cutting Edges, 6-5/16-Inch Overall Length. Max suggested RPM: 300 on hardwood, 500 on softwood. Made of alloyed steel, long-lasting cu...

Features: 4 Cutting Edges, 5-1/2-Inch Overall Length. Max suggested RPM: 300 on hardwood, 500 on softwood. Made of alloyed steel, long-lasting cut...

Features: 4 Cutting Edges, 5-1/2-Inch Overall Length. Max suggested RPM: 500 on hardwood, 1000 on softwood. Made of alloyed steel, long-lasting cu...

Features: 4 Cutting Edges, 5-1/2-Inch Overall Length. Max suggested RPM: 500 on hardwood, 1000 on softwood. Made of alloyed steel, long-lasting cu...

Features: 30mm (1-13/16-Inch) diameter. 5/8-Inch bore 0.055 thickness. Details: Reduction ring for saw blades. 30mm (1-13/16-Inch) diameter, 5/8-...

Features: Table saw balance blade and sanding disk set Mount the balance blade and sanding disk in your table saw and line it up with a square for...

Features: 0.102 kerf thickness, 0.062 plate thickness, 10Degree hook angle, 15Degree ATB grind, 2/6/32 pin hole. For crosscuts. Perfect finishing....

Features:  Chrome plated blade Body flatness & balancing Tri-metal blazing Surface hardness: 380-400 Vickers MATB Grind tooth Made in Italy ...

Features: CHROME PLATED BLADE: Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power ...

Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. Cut solid wood, melamine, laminates, plywood, chi...

Features: For fine finish crosscuts. Glass-smooth finish on your miter cuts To be used on compound miter saws for cutting soft/hardwood, plywood a...

Features: For fine finish crosscuts. Glass-smooth finish on your miter cuts. To be used on compound miter saws for cutting soft/hardwood, plywood ...

Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...

Features: For very long-lasting cuts, up to 60 times longer than carbide blades. For portable circular saws/miter saws. Cut fiber cement & pla...

Features: Handy 5/8-inch bore for table saws Cove cutter mounts easily on a tablesaw Used in conjunction with a pair of angled fences Changing fen...

Features: For heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions. 0.122 kerf thickness, 0.098 plate thickness, -7° hook...

Features: For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut c...

Features: For fine finish crosscuts. The 5° negative hook limits splintering and "climbing". Use on radial arm saws & sliding compound miter s...

Features: For fine finish crosscuts. The 5° negative hook limits splintering and "climbing". Use on radial arm saws & sliding compound miter s...

Features: Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches...

Features: 1-1/4-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation Premium Quality Solid Carbide, Excellent finish on the workpiece upper s...

Features: 2-Inch Cutting Length, 4-Inch Overall Length. Premium Quality Solid Carbide. Excellent finish on the lower side of the workpiece. 2 cutt...

Features: 2-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation. Premium Quality Solid Carbide, Excellent finish on the workpiece lower side...

Features: 1-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation. Premium Quality Solid Carbide, Excellent finish on the workpiece lower side...