Customer
Reviews
Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. Cut solid wood, melamine, laminates, plywood, chi...
View full detailsFeatures: For fine finish crosscuts. Glass-smooth finish on your miter cuts To be used on compound miter saws for cutting soft/hardwood, plywood a...
View full detailsFeatures: For fine finish crosscuts. Glass-smooth finish on your miter cuts. To be used on compound miter saws for cutting soft/hardwood, plywood ...
View full detailsFeatures: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...
View full detailsFeatures: For very long-lasting cuts, up to 60 times longer than carbide blades. For portable circular saws/miter saws. Cut fiber cement & pla...
View full detailsFeatures: Handy 5/8-inch bore for table saws Cove cutter mounts easily on a tablesaw Used in conjunction with a pair of angled fences Changing fen...
View full detailsFeatures: Stainless steel version. The item Comes with a carrying case. Anti-kickback design to reduce the possibility of overfeeding that can occ...
View full detailsFeatures: For heavy-duty cutting, excellent on thin-walled, good on thick-walled extrusions. 0.122 kerf thickness, 0.098 plate thickness, -7° hook...
View full detailsFeatures: For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut c...
View full detailsFeatures: For fine finish crosscuts. The 5° negative hook limits splintering and "climbing". Use on radial arm saws & sliding compound miter s...
View full detailsFeatures: LINE TRACING TRANSMITTER: Allows you to energize metallic lines for extremely accurate line tracing, underground cable locating, and mor...
View full detailsFeatures: Legend: D = Diameter (inches and/or mm) T = Tooth Count B = Bore (inches or mm) K = Tooth Thickness (inches) P = Blade Thickness (inches...
View full detailsFeatures: 1-1/4-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation Premium Quality Solid Carbide, Excellent finish on the workpiece upper s...
View full detailsFeatures: 2-Inch Cutting Length, 4-Inch Overall Length. Premium Quality Solid Carbide. Excellent finish on the lower side of the workpiece. 2 cutt...
View full detailsFeatures: 2-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation. Premium Quality Solid Carbide, Excellent finish on the workpiece lower side...
View full detailsFeatures: 1-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation. Premium Quality Solid Carbide, Excellent finish on the workpiece lower side...
View full detailsFeatures: 1-Inch Cutting Length, 2 Cutting Edges, Right-Hand Rotation Premium Quality Solid Carbide, Excellent finish on the workpiece lower side ...
View full detailsFeatures: 7/8-Inch Cutting Length, 3/16-Inch Minor Cutting Length, 3-Inch Overall Length Premium Quality Solid Carbide Excellent finish on both th...
View full detailsFeatures: T-202 Bulb auger for general purpose cleaning, grabs and holds the blockage A-13 pin key used to replace tools T-211 Spade cutter use...
View full detailsFeatures: Precise Positioning: Accurately move your workpiece both horizontally and longitudinally Fine Tuning: Cast side knobs accurately dial in...
View full detailsFeatures: Perfect to wear in daytime conditions Contrast trim combinations make workers much more noticeable in low light and broad daylight. Made...
View full detailsFeatures: 12 pc. Set Premium Hex Shank 1/4-inch Quick Release 135-Degree Split Point Set includes: 1/16, 3/32, 1/8-inch, 5/32, 3/16, 7/32, 1/4-inc...
View full detailsBrand: NorsemanFeatures: 115 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point 135-Degree split point for accurate centering and ...
View full detailsFeatures: Small to medium fit & coverage. Optically correct polycarbonate lenses meet ANSI Z87.1 impact ratings. TR-90 frame construction with...
View full details