Tools & Supplies

Features: Rout safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Easy to screw on wooden panels, MDF o...

Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/4-Inch collets. 3-3/16-Inch overall length. Details: Steel-made router collet extension ...

Features: 1-1/4-Inch Cutting Length, 2-3/4-Inch Length, Equipped with Bearing Smooth and precise cut Exceptional chip ejection to allow cleaner an...

Features: Adjustable at 0. 002" increments for groove width from 13/64" to 17/32" Cut stock thickness 1/2 through 1-1/4-Inch 2 Hi-Density Carbide ...

Features: 3/8-Inch cutting depth, 1/21-9/16-inch thickness, 3-35/64-inch overall length 3 hi-density Carbide cutting edges for long-lasting perfor...

Features: Contains a 3-inch tenon cutting bit and a 1-7/8-inch rail and stile router bit set Anti-kickback design, Non-Stick Orange Shield Coating...

Features: TENSILE STRENGTH = 26 lbs./in (45.5 N/10 mm) ADHESION TO STAINLESS STEEL37 oz/in width (4.05 N/10 mm width) ELONGATION 5% THICKNESS - WI...

Features:  For rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance. Use on radial arm saws, miter saws, circular...

855.506.11 V-TONGUE AND GROOVE S=1/2''

Features:  Machines: radial arms, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood Carbide tipped Low ...

Features: Aggressive composition for faster material removal Innovative design for reduced noise Reduced vibration for superior user experience Hi...

Features:  Max 50 Amps @240V 10 Circuits provided Maximum 16 Circuits Included Breakers: 1-30 Amp 2-pole, 1-20 Amp 2-pole, 2-20 Amp 1-pole, 2-20 A...

Features: Power your most important nail and staple guns with the portable Rolair 1.5 HP air compressor 3400 RPM motor creates 4 CFM air pressure...

Features: Rolair twin tank compressor 5715K17-0003 outputs 7.3-CFM at 90-PSI 1.5-HP motor operates at 1755 RPM with overload protection Heavy-du...

Features: 160 mm diameter Blade body thickness 2.2 mm Bore: 20 mm 56 Teeth Details: Technical features of the teeth tooth HW: - Height in mm: 6 ~...

Features: Contains a 3-1/2-inch cove raised panel bit and a pair of 1-3/4-inch stand rail & stile bits Anti-kickback design, Non-Stick Orange ...

Features: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...