Skip to content
FREE Shipping over $49 + SAVE 10% WITH CODE "SUMMER" - Click for Details*
FREE Shipping over $49 + SAVE 10% WITH CODE "SUMMER" - Click for Details*

Tools & Supplies

Filters

$
$

  • CMT 806.001.11 3-Piece Flush Trim Bit Set, 1/4-Inch Shank

    CMT Orange Tools
    $51.90 - $51.90
    $51.90
    $51.90
    $51.90 - $51.90
    $51.90
    Only 2 left!

    Features: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...

    View full details
    $51.90 - $51.90
    $51.90
    $51.90
    $51.90 - $51.90
    $51.90

  • Metabo HPT Demolition Hammer, 70 Pound, 51.6 Ft-Lbs (70J) of Impact Energy, User Vibration Protection, Aluminum Housing Body, 1-1/8-Inch Hex Shank (H90SG)

    Metabo HPT
    $1,299.00 - $1,299.00
    $1,299.00
    $1,299.00
    $1,299.00 - $1,299.00
    $1,299.00
    in stock

    Features: MOTOR: Powerful 15 amp motor produces a full load impact rate of 1000 BPM IMPACT RATE: 51.6 ft-lbs (70J) of impact energy- highest demol...

    View full details
    $1,299.00 - $1,299.00
    $1,299.00
    $1,299.00
    $1,299.00 - $1,299.00
    $1,299.00
  • Save 0% Save %

    Morse Kraken Hole Saw, Carbide Tipped, 2" Diameter, 1 Blade

    MK Morse
    $17.00
    $17.00 - $17.00
    $17.00
    $16.99
    $16.99 - $16.99
    $16.99
    in stock

    Features: Made in the U. S. A. Precision ground and set carbide teeth Large gullets for better chip clearance Smooth cutting action Side slot desi...

    View full details
    $17.00
    $17.00 - $17.00
    $17.00
    $16.99
    $16.99 - $16.99
    $16.99
    Save 0% Save %
  • Save 1% Save %

    Bessey KT5-2 Edge clamp with two wooden handle, Black/Red/Silver

    Bessey
    $18.36
    $18.36 - $18.36
    $18.36
    $18.22
    $18.22 - $18.22
    $18.22
    in stock

    Features: Practical accessory for clamping edges and difficult to reach areas Suitable for conventional screw Clamps With a max. Rail thickness of...

    View full details
    $18.36
    $18.36 - $18.36
    $18.36
    $18.22
    $18.22 - $18.22
    $18.22
    Save 1% Save %

  • CMT 12" Combination Circular Saw Blade

    CMT Orange Tools
    $72.13 - $72.13
    $72.13
    $72.13 - $72.13
    $72.13
    in stock

    Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. For radial arm saws, miter saws, table & spec...

    View full details
    $72.13 - $72.13
    $72.13
    $72.13 - $72.13
    $72.13

  • CMT Corner Beading Bit, 1/2-Inch Shank, 1/4-Inch Radius

    CMT Orange Tools
    $29.29 - $29.29
    $29.29
    $29.29 - $29.29
    $29.29
    in stock

    Features: 1-1/8-Inch Diameter, 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-13/16-Inch Length. Give a perfect shape for table legs an...

    View full details
    $29.29 - $29.29
    $29.29
    $29.29 - $29.29
    $29.29

  • CMT Solid Carbide Bit for Domino Jointing Machines by Festool DF500

    CMT Orange Tools
    $21.71 - $21.71
    $21.71
    $21.71 - $21.71
    $21.71
    in stock

      Features: Premium quality super-strength steel. Spiral portion coating with black P.T.F.E. Extra-fine micrograin carbide spiral portion. 2 cu...

    View full details
    $21.71 - $21.71
    $21.71
    $21.71 - $21.71
    $21.71

  • CMT 1/2 in. Router Collet Extension

    CMT Orange Tools
    $0.00 - $0.00
    $0.00
    $30.88
    $30.88 - $30.88
    $30.88
    in stock

    Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/2-Inch collets. 3-15/32-Inch overall length. Details:  Steel-made router collet extensio...

    View full details
    $0.00 - $0.00
    $0.00
    $30.88
    $30.88 - $30.88
    $30.88

  • CMT ITK Plus Finish Blade for Sliding Miter Saws 12In x 72T x 1In.

    CMT Orange Tools
    $40.04 - $40.04
    $40.04
    $40.04 - $40.04
    $40.04
    in stock

    Features: For fine finish crosscuts. glass-smooth finish on your miter cuts. Cut soft and hardwood, plywood, two-sided laminates. for use on co...

    View full details
    $40.04 - $40.04
    $40.04
    $40.04 - $40.04
    $40.04

  • CMT 838.160.11 Roundover Bit, 1/4-Inch Shank, 1/16-Inch Radius, Carbide-Tipped

    CMT Orange Tools
    $24.07 - $24.07
    $24.07
    $24.07 - $24.07
    $24.07
    Only 5 left!

    Features: 5/8-Inch Diameter, 1/2-Inch Cutting Length, 2-5/32-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped w...

    View full details
    $24.07 - $24.07
    $24.07
    $24.07 - $24.07
    $24.07

  • CMT ORANGE TOOLS ITK COMP MITER 14"x96x1"

    CMT Orange Tools
    $58.42 - $58.42
    $58.42
    $58.42 - $58.42
    $58.42
    in stock

    Features: Chrome plated blade. Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power ...

    View full details
    $58.42 - $58.42
    $58.42
    $58.42 - $58.42
    $58.42

  • CMT 12-Piece Forstner Bit Set

    CMT Orange Tools
    $76.59 - $76.59
    $76.59
    $76.59 - $76.59
    $76.59
    in stock

    Features: Made of super strength alloyed steel (SP). Delivered in practical clamshell packaging. Ideal for drill presses, electric and cordless dr...

    View full details
    $76.59 - $76.59
    $76.59
    $76.59 - $76.59
    $76.59

  • CMT 10 In x 60 x 5/8 In ITK Fine Cut-Off Blades

    CMT Orange Tools
    $39.57 - $39.57
    $39.57
    $39.57 - $39.57
    $39.57
    in stock

    Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...

    View full details
    $39.57 - $39.57
    $39.57
    $39.57 - $39.57
    $39.57

  • CMT 14mm Forstner Bit

    CMT Orange Tools
    $9.45 - $9.45
    $9.45
    $9.45 - $9.45
    $9.45
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $9.45 - $9.45
    $9.45
    $9.45 - $9.45
    $9.45

  • CMT 1/2-Inch Forstner Bit

    CMT Orange Tools
    $7.02 - $7.02
    $7.02
    $7.02 - $7.02
    $7.02
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $7.02 - $7.02
    $7.02
    $7.02 - $7.02
    $7.02

  • CMT Forstner Bit 24mm (61/64-Inch) Diameter, 8mm Shank

    CMT Orange Tools
    $12.99 - $12.99
    $12.99
    $12.99 - $12.99
    $12.99
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $12.99 - $12.99
    $12.99
    $12.99 - $12.99
    $12.99

  • CMT Flush Trim Bit with Double Bearing 2 In. Cutting Length 1/2 In. Shank

    CMT Orange Tools
    $38.58 - $38.58
    $38.58
    $38.58 - $38.58
    $38.58
    in stock

    Features: 3/4 In. cutting diameter, 4-5/16 In. length. 2 carbide cutting tips for long-lasting performance. Down shear design allows for clean ...

    View full details
    $38.58 - $38.58
    $38.58
    $38.58 - $38.58
    $38.58
  • BOWL & TRAY BIT S=1/2'' 3/4''x1/4''x2-3/8''

    CMT Bowl & Tray Bit

    CMT Orange Tools
    $31.69 - $31.69
    $31.69
    $31.69 - $31.69
    $31.69
    in stock

    Features:  Everybody needs a cutting board, for example, and these bits rout a groove that's perfect for catching meat juice and drippings Or use...

    View full details
    $31.69 - $31.69
    $31.69
    $31.69 - $31.69
    $31.69

  • MK Morse MHS23M, 25 Piece, Industrial Bimetal Hole Saw Kit, 1 Kit

    MK Morse
    $253.35 - $253.35
    $253.35
    $253.35 - $253.35
    $253.35
    in stock

    Color: MultiFeatures: Patent Pending tooth set design optimized to remove material faster New cap reduces runout and vibration New side slot incre...

    View full details
    $253.35 - $253.35
    $253.35
    $253.35 - $253.35
    $253.35

  • MK Morse MHS02E, 8 Piece, Electrician's Bimetal Hole Saw Kit, 1 Kit

    MK Morse
    $70.79 - $70.79
    $70.79
    $70.79 - $70.79
    $70.79
    in stock

    Color: MultiFeatures: Patent Pending tooth set design optimized to remove material faster New cap reduces runout and vibration New side slot incre...

    View full details
    $70.79 - $70.79
    $70.79
    $70.79 - $70.79
    $70.79

  • MK Morse Devil Circular Saw Blade, Carbide Tipped, Steel Cutting, 14In (1-Pack)

    MK Morse
    $145.15 - $145.15
    $145.15
    $145.15 - $145.15
    $145.15
    in stock

    Features: Faster, cleaner, accurate cutting from precision-ground, carbide teeth, minimizing the need for secondary machining. Cooler cutting for ...

    View full details
    $145.15 - $145.15
    $145.15
    $145.15 - $145.15
    $145.15

  • MK Morse Devil CSM1072FNFC, Circular Saw Blade, Carbide Tipped, Aluminum Cutting, 10 inch, 1 Pack

    MK Morse
    $99.00 - $99.00
    $99.00
    $99.00 - $99.00
    $99.00
    in stock

    Color: SilverFeatures: Faster, cleaner, accurate cutting from precision-ground, carbide teeth, minimizing the need for secondary machining Cooler ...

    View full details
    $99.00 - $99.00
    $99.00
    $99.00 - $99.00
    $99.00

  • Metabo HPT 3 1/4in Round Head Framing Pneumatic Nailer

    Metabo HPT
    $230.00 - $230.00
    $230.00
    $230.00 - $230.00
    $230.00
    in stock

    Features: TECHNOLOGY: Experience quick response and rapid, powerful driving with the Metabo HPT cylinder valve drive mechanism TRIGGER: Selectabl...

    View full details
    $230.00 - $230.00
    $230.00
    $230.00 - $230.00
    $230.00

  • Bessey Steel spring clamp - 2-inch capacity

    Bessey
    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99
    in stock

    Features: Light-duty general purpose clamps Locks onto projects with firm grip Vinyl tips and handles Heavy-duty springs for a firm hold Quick ...

    View full details
    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99
Trust Guard Security Scanned