Customer
Reviews
Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/4-Inch collets. 3-3/16-Inch overall length. Details: Steel-made router collet extension ...
View full detailsFeatures: 1-1/4-Inch Cutting Length, 2-3/4-Inch Length, Equipped with Bearing Smooth and precise cut Exceptional chip ejection to allow cleaner an...
View full detailsFeatures: Adjustable at 0. 002" increments for groove width from 13/64" to 17/32" Cut stock thickness 1/2 through 1-1/4-Inch 2 Hi-Density Carbide ...
View full detailsFeatures: 3/8-Inch cutting depth, 1/21-9/16-inch thickness, 3-35/64-inch overall length 3 hi-density Carbide cutting edges for long-lasting perfor...
View full detailsFeatures: Contains a 3-inch tenon cutting bit and a 1-7/8-inch rail and stile router bit set Anti-kickback design, Non-Stick Orange Shield Coating...
View full detailsFeatures: For rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance. Use on radial arm saws, miter saws, circular...
View full details855.506.11 V-TONGUE AND GROOVE S=1/2''
Features: Machines: radial arms, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood Carbide tipped Low ...
View full detailsFeatures: Aggressive composition for faster material removal Innovative design for reduced noise Reduced vibration for superior user experience Hi...
View full detailsFeatures: Holds woodturning gouges for sharpening bevels at consistent angles Adjusts 40 degrees so beveling your tools is easy Jig's clamp fir...
View full detailsFeatures: Cutting diameter: 3/4"; Cutting length 2”; Overall length: 4-1/2": Shank size 1/2"; Max speed: 18,000 RPM These XTREME flush trim bits g...
View full detailsFeatures: Chrome plated, steel threaded spindle & handle 2 5/8" throat depth cast iron construction designed for work benches up to 2" thickne...
View full detailsFeatures: Patent Pending tooth set design optimized to remove material faster Attached arbor and pilot drill included New side slot increased leve...
View full detailsFeatures: Cuts machinable metals with shock-resistant bi-metal teeth Variable pitch blade Reduced vibration cutting Patent-pending tooth design...
View full detailsFeatures: Design for outdoor use Works with standard or arched frames Meets ANSI, CSA and OSHA standards Details: Metaltech scaffolding systems an...
View full detailsFeatures: 160 mm diameter Blade body thickness 2.2 mm Bore: 20 mm 56 Teeth Details: Technical features of the teeth tooth HW: - Height in mm: 6 ~...
View full detailsFeatures: Contains a 3-1/2-inch cove raised panel bit and a pair of 1-3/4-inch stand rail & stile bits Anti-kickback design, Non-Stick Orange ...
View full detailsFeatures: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...
View full detailsFeatures: Magnification: 10X-200X Standard stand Focus support included Pixel: 2M (resolution: 1600x1200) Built-in adjustable LED Power Supply: US...
View full detailsFeatures: Magnification: 10X-200X Universal stand Pixel: 2M (resolution: 1600x1200) Built-in adjustable LED Focus support included Can take pictur...
View full detailsFeatures: Made in the U. S. A. Precision ground and set carbide teeth Large gullets for better chip clearance Smooth cutting action Side slot desi...
View full detailsFeatures: Practical accessory for clamping edges and difficult to reach areas Suitable for conventional screw Clamps With a max. Rail thickness of...
View full detailsFeatures: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. For radial arm saws, miter saws, table & spec...
View full detailsFeatures: 1-1/8-Inch Diameter, 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-13/16-Inch Length. Give a perfect shape for table legs an...
View full details