Skip to content
FREE Shipping over $49 + SAVE 10% WITH CODE "SUMMER" - Click for Details*
FREE Shipping over $49 + SAVE 10% WITH CODE "SUMMER" - Click for Details*

Tools & Supplies

Filters

$
$
  • Save 23% Save %

    CMT Xtreme Compression Flush Trim Bits 2 Flutes Carbide Tipped

    CMT Orange Tools
    $60.98
    $60.98 - $60.98
    $60.98
    $46.82
    $46.82 - $46.82
    $46.82
    in stock

    Features: Cutting diameter: 3/4"; Cutting length 2”; Overall length: 4-1/2": Shank size 1/2"; Max speed: 18,000 RPM These XTREME flush trim bits g...

    View full details
    $60.98
    $60.98 - $60.98
    $60.98
    $46.82
    $46.82 - $46.82
    $46.82
    Save 23% Save %

  • Rolair 9-Gallon Twin Tank Compressor with Dual Controls

    Rolair
    $1,228.50 - $1,228.50
    $1,228.50
    $1,416.16
    $1,416.16 - $1,416.16
    $1,416.16
    Only 4 left!

    Features: Rolair twin tank compressor 5715K17-0003 outputs 7.3-CFM at 90-PSI 1.5-HP motor operates at 1755 RPM with overload protection Heavy-du...

    View full details
    $1,228.50 - $1,228.50
    $1,228.50
    $1,416.16
    $1,416.16 - $1,416.16
    $1,416.16
  • Save 4% Save %

    Rolair .5 Hp Ultra Quiet Portable Air Compressor

    Rolair
    $237.00
    $237.00 - $237.00
    $237.00
    $227.61
    $227.61 - $227.61
    $227.61
    in stock

    Features: 2.8 Amp Motor Super Quiet Braided Discharge Hose Start/Stop Pressure Switch Replaceable Intake Filter Details: The incredibly quiet an...

    View full details
    $237.00
    $237.00 - $237.00
    $237.00
    $227.61
    $227.61 - $227.61
    $227.61
    Save 4% Save %

  • Rolair 2 Hp (115V), 4.2 Cfm@90Psi, 4.2 Gallon, Quiet Stack Tank Compressor

    Rolair
    $404.37 - $404.37
    $404.37
    $418.36
    $418.36 - $418.36
    $418.36
    in stock

    Features: Sold on AmazonDetails: The VT20ST combines a low-noise and low-speed pump with a higher CFM output. This 4.2 CFM compressor delivers as m...

    View full details
    $404.37 - $404.37
    $404.37
    $418.36
    $418.36 - $418.36
    $418.36

  • CMT Orange Tools Circular, 160 x 20 x 56 2.2 Z ATB 15 Degrees

    CMT Orange Tools
    $41.08 - $41.08
    $41.08
    $50.91
    $50.91 - $50.91
    $50.91
    Only 3 left!

    Features: 160 mm diameter Blade body thickness 2.2 mm Bore: 20 mm 56 Teeth Details: Technical features of the teeth tooth HW: - Height in mm: 6 ~...

    View full details
    $41.08 - $41.08
    $41.08
    $50.91
    $50.91 - $50.91
    $50.91

  • CMT 800.516.11 3-Piece Standard Kitchen Set in Hardwood Case, 1/2-Inch Shank

    CMT Orange Tools
    $187.95 - $187.95
    $187.95
    $187.95
    $187.95 - $187.95
    $187.95
    Only 2 left!

    Features: Contains a 3-1/2-inch cove raised panel bit and a pair of 1-3/4-inch stand rail & stile bits Anti-kickback design, Non-Stick Orange ...

    View full details
    $187.95 - $187.95
    $187.95
    $187.95
    $187.95 - $187.95
    $187.95

  • CMT 806.001.11 3-Piece Flush Trim Bit Set, 1/4-Inch Shank

    CMT Orange Tools
    $51.90 - $51.90
    $51.90
    $51.90
    $51.90 - $51.90
    $51.90
    Only 1 left!

    Features: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...

    View full details
    $51.90 - $51.90
    $51.90
    $51.90
    $51.90 - $51.90
    $51.90

  • CMT 12" Combination Circular Saw Blade

    CMT Orange Tools
    $72.12 - $72.12
    $72.12
    $72.12 - $72.12
    $72.12
    in stock

    Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. For radial arm saws, miter saws, table & spec...

    View full details
    $72.12 - $72.12
    $72.12
    $72.12 - $72.12
    $72.12

  • CMT Corner Beading Bit, 1/2-Inch Shank, 1/4-Inch Radius

    CMT Orange Tools
    $30.85 - $30.85
    $30.85
    $30.85 - $30.85
    $30.85
    in stock

    Features: 1-1/8-Inch Diameter, 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-13/16-Inch Length. Give a perfect shape for table legs an...

    View full details
    $30.85 - $30.85
    $30.85
    $30.85 - $30.85
    $30.85

  • CMT Solid Carbide Bit for Domino Jointing Machines by Festool DF500

    CMT Orange Tools
    $21.71 - $21.71
    $21.71
    $21.71 - $21.71
    $21.71
    in stock

      Features: Premium quality super-strength steel. Spiral portion coating with black P.T.F.E. Extra-fine micrograin carbide spiral portion. 2 cu...

    View full details
    $21.71 - $21.71
    $21.71
    $21.71 - $21.71
    $21.71

  • CMT 1/2 in. Router Collet Extension

    CMT Orange Tools
    $0.00 - $0.00
    $0.00
    $30.86
    $30.86 - $30.86
    $30.86
    in stock

    Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/2-Inch collets. 3-15/32-Inch overall length. Details:  Steel-made router collet extensio...

    View full details
    $0.00 - $0.00
    $0.00
    $30.86
    $30.86 - $30.86
    $30.86

  • CMT ITK Plus Finish Blade for Sliding Miter Saws 12In x 72T x 1In.

    CMT Orange Tools
    $39.34 - $39.34
    $39.34
    $39.34 - $39.34
    $39.34
    in stock

    Features: For fine finish crosscuts. glass-smooth finish on your miter cuts. Cut soft and hardwood, plywood, two-sided laminates. for use on co...

    View full details
    $39.34 - $39.34
    $39.34
    $39.34 - $39.34
    $39.34

  • CMT 838.160.11 Roundover Bit, 1/4-Inch Shank, 1/16-Inch Radius, Carbide-Tipped

    CMT Orange Tools
    $22.64 - $22.64
    $22.64
    $22.64 - $22.64
    $22.64
    in stock

    Features: 5/8-Inch Diameter, 1/2-Inch Cutting Length, 2-5/32-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped w...

    View full details
    $22.64 - $22.64
    $22.64
    $22.64 - $22.64
    $22.64

  • CMT ORANGE TOOLS ITK COMP MITER 14"x96x1"

    CMT Orange Tools
    $58.41 - $58.41
    $58.41
    $58.41 - $58.41
    $58.41
    in stock

    Features: Chrome plated blade. Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power ...

    View full details
    $58.41 - $58.41
    $58.41
    $58.41 - $58.41
    $58.41

  • CMT Roundover Bit, 1/2-Inch Shank, 3/4-Inch Radius, Carbide-Tipped

    CMT Orange Tools
    $38.00 - $38.00
    $38.00
    $38.00 - $38.00
    $38.00
    Only 3 left!

    Features: 2-Inch Diameter, 1-Inch Cutting Length, 2-57/64-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped with...

    View full details
    $38.00 - $38.00
    $38.00
    $38.00 - $38.00
    $38.00

  • CMT 12-Piece Forstner Bit Set

    CMT Orange Tools
    $75.61 - $75.61
    $75.61
    $75.61 - $75.61
    $75.61
    in stock

    Features: Made of super strength alloyed steel (SP). Delivered in practical clamshell packaging. Ideal for drill presses, electric and cordless dr...

    View full details
    $75.61 - $75.61
    $75.61
    $75.61 - $75.61
    $75.61

  • CMT 10 In x 60 x 5/8 In ITK Fine Cut-Off Blades

    CMT Orange Tools
    $39.50 - $39.50
    $39.50
    $39.50 - $39.50
    $39.50
    in stock

    Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...

    View full details
    $39.50 - $39.50
    $39.50
    $39.50 - $39.50
    $39.50

  • CMT 14mm Forstner Bit

    CMT Orange Tools
    $14.96 - $14.96
    $14.96
    $14.96 - $14.96
    $14.96
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $14.96 - $14.96
    $14.96
    $14.96 - $14.96
    $14.96

  • CMT 1/2-Inch Forstner Bit

    CMT Orange Tools
    $11.99 - $11.99
    $11.99
    $11.99 - $11.99
    $11.99
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $11.99 - $11.99
    $11.99
    $11.99 - $11.99
    $11.99

  • CMT Forstner Bit 24mm (61/64-Inch) Diameter, 8mm Shank

    CMT Orange Tools
    $12.96 - $12.96
    $12.96
    $12.96 - $12.96
    $12.96
    in stock

    Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

    View full details
    $12.96 - $12.96
    $12.96
    $12.96 - $12.96
    $12.96

  • CMT Flush Trim Bit with Double Bearing 2 In. Cutting Length 1/2 In. Shank

    CMT Orange Tools
    $38.58 - $38.58
    $38.58
    $38.58 - $38.58
    $38.58
    in stock

    Features: 3/4 In. cutting diameter, 4-5/16 In. length. 2 carbide cutting tips for long-lasting performance. Down shear design allows for clean ...

    View full details
    $38.58 - $38.58
    $38.58
    $38.58 - $38.58
    $38.58
  • BOWL & TRAY BIT S=1/2'' 3/4''x1/4''x2-3/8''

    CMT Bowl & Tray Bit

    CMT Orange Tools
    $36.10 - $36.10
    $36.10
    $36.10 - $36.10
    $36.10
    in stock

    Features:  Everybody needs a cutting board, for example, and these bits rout a groove that's perfect for catching meat juice and drippings Or use...

    View full details
    $36.10 - $36.10
    $36.10
    $36.10 - $36.10
    $36.10

  • Rolair (132BV) Air Compressor Tank Drain Cock - 1/4" NPT Ball Valve

    Rolair
    $26.47 - $26.47
    $26.47
    $26.47 - $26.47
    $26.47
    in stock

    Features: Part #132BV - Air Compressor Tank Drain Cock - 1/4" NPT Ball Valve  Details: The Rolair 132BV Ball Valve Air Compressor Drain Cock fea...

    View full details
    $26.47 - $26.47
    $26.47
    $26.47 - $26.47
    $26.47

  • Rolair 012035000F Compressor 5-1/4" Long OEM Replacement Oil Dip Stick

    Rolair
    $20.91 - $20.91
    $20.91
    $20.91 - $20.91
    $20.91
    in stock

    Features: Diameter: 3/4" Length: 5-1/4" Included O-Ring Part Number: 012035000F Details:  Brand new replacement oil dipstick for Rolair air comp...

    View full details
    $20.91 - $20.91
    $20.91
    $20.91 - $20.91
    $20.91
Trust Guard Security Scanned