Tools & Supplies

Features: O.D. Capacity: 1-7/8 to 4-1/2" O.D. Capacity: 48 to 114 mm For cutting PVC Best tracking, easiest cutting tubing cutters available Repla...

Features: Indoor/outdoor mastic foil tape UL 181B-FX Listed - clearly printed on the tape for quick identification Instant, water-resistant grip t...

Features: TENSILE STRENGTH = 26 lbs./in (45.5 N/10 mm) ADHESION TO STAINLESS STEEL37 oz/in width (4.05 N/10 mm width) ELONGATION 5% THICKNESS - WI...

Features:  For rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance. Use on radial arm saws, miter saws, circular...

855.506.11 V-TONGUE AND GROOVE S=1/2''

Features:  Machines: radial arms, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood Carbide tipped Low ...

Features: 160 mm diameter Blade body thickness 2.2 mm Bore: 20 mm 56 Teeth Details: Technical features of the teeth tooth HW: - Height in mm: 6 ~...

Features: Contains a 3-1/2-inch cove raised panel bit and a pair of 1-3/4-inch stand rail & stile bits Anti-kickback design, Non-Stick Orange ...

Features: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...

Features:  Includes Dremel 4000 rotary tool, storage case and 36 accessories/attachments. Electronic feedback circuitry sustains speed under load...

Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. For radial arm saws, miter saws, table & spec...

Features: 1-1/8-Inch Diameter, 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-13/16-Inch Length. Give a perfect shape for table legs an...

  Features: Premium quality super-strength steel. Spiral portion coating with black P.T.F.E. Extra-fine micrograin carbide spiral portion. 2 cu...

Features: Optimum splitting results, less force required due to wedge-shaped blade. Long service life, little weight With high-quality ash handle,...

Features: B-Line Multi-Component Dispensing Gun with smooth & powerful Highest Thrust 26:1 Ratio Drive. Our most popular 2-component model ...

Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/2-Inch collets. 3-15/32-Inch overall length. Details:  Steel-made router collet extensio...

Features: For fine finish crosscuts. glass-smooth finish on your miter cuts. Cut soft and hardwood, plywood, two-sided laminates. for use on co...

Features: Extend any plastic cartridge nozzle to dispense in difficult situations Total length is 7″. Base is 4.5″ then turns 45 degrees and exten...

Features: 7:1 manual drive steel skeleton frame cartridge adhesive caulking gun for use on 1/10 gallon (10 oz) or 300 ml cartridges. Thrust: 200 l...

Features: Turn your Dremel rotary tool into a powerful cutting machine with the 69-piece Cut-Off Wheel accessory set Kit includes a reusable stora...

Features: GEDORE OX E-78 H-0800 Spare handle, hickory, 800 mm GEDORE stands for a universal, comprehensive offer of high-end tools, special tools....

Features: 15 cleaning pads - polishing, eraser foam, non scratch, kitchen scour, extreme scour (3 pieces each), to clean from the most delicate su...

Features: 5/8-Inch Diameter, 1/2-Inch Cutting Length, 2-5/32-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped w...