Tools & Supplies

Features: Indoor/outdoor mastic foil tape UL 181B-FX Listed - clearly printed on the tape for quick identification Instant, water-resistant grip t...

Features: TENSILE STRENGTH = 26 lbs./in (45.5 N/10 mm) ADHESION TO STAINLESS STEEL37 oz/in width (4.05 N/10 mm width) ELONGATION 5% THICKNESS - WI...

Features:  For rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance. Use on radial arm saws, miter saws, circular...

855.506.11 V-TONGUE AND GROOVE S=1/2''

Features:  Machines: radial arms, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood Carbide tipped Low ...

Features: MOTOR: 7.9 Amp, 900W input motor to tackle the most demanding applications RPM: No-Load Speed 10,500 RPM for excellent performance in g...

Features: IMPACT DRIVER: 1/4 in. tool-less hex drive for quick and simple bit replacement and secure holding power IMPACT DRIVER: Produces up to 1...

Features: 160 mm diameter Blade body thickness 2.2 mm Bore: 20 mm 56 Teeth Details: Technical features of the teeth tooth HW: - Height in mm: 6 ~...

Features: Contains a 3-1/2-inch cove raised panel bit and a pair of 1-3/4-inch stand rail & stile bits Anti-kickback design, Non-Stick Orange ...

Features: Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. 2 Hi-Density Carbide cutting edges for long-lasting performance. Equippe...

Features: MOTOR: Powerful 15 amp motor produces a full load impact rate of 1000 BPM IMPACT RATE: 51.6 ft-lbs (70J) of impact energy- highest demol...

Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. For radial arm saws, miter saws, table & spec...

Features: 1-1/8-Inch Diameter, 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-13/16-Inch Length. Give a perfect shape for table legs an...

  Features: Premium quality super-strength steel. Spiral portion coating with black P.T.F.E. Extra-fine micrograin carbide spiral portion. 2 cu...

Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/2-Inch collets. 3-15/32-Inch overall length. Details:  Steel-made router collet extensio...

Features: For fine finish crosscuts. glass-smooth finish on your miter cuts. Cut soft and hardwood, plywood, two-sided laminates. for use on co...

Features: 5/8-Inch Diameter, 1/2-Inch Cutting Length, 2-5/32-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped w...

Features: Chrome plated blade. Protects the tool from corrosion, rust, and resin/residue build-up. Extends tool life dramatically. Absorbed power ...

Features: Made of super strength alloyed steel (SP). Delivered in practical clamshell packaging. Ideal for drill presses, electric and cordless dr...

Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...

Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...